Ink cartridge reset button full#

Once an ink bottle has been opened, do not leave it with bottle cap off.Do not mix ink with water or other ink.This may result in accidental ingestion, inappropriate use, or poor ink quality. Do not transfer ink to other containers.Ink bottles may be damaged or bottle caps may come off by such impact, and ink may leak. Do not subject ink bottles to impacts.Bottles may warp and cause ink leakage or ink may become poor quality. Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in a car.Do not use ink bottles and ink contained therein except to refill tanks of printers specified by Canon.Ink may stain clothes or other belongings permanently.When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.If the ink bottles are laid down, ink may leak. When you store ink bottles, close bottle caps completely and place bottles in standing position.(In case of eye contact or swallowing, rinse with water and contact a doctor immediately). Be careful not to get any ink in your eyes or in your mouth.Changing the remaining ink level notification setting.You can also set the remaining ink level notification function or reset the remaining ink level count from your computer. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality or may cause malfunction or damage to the printer. If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary.The remaining ink level notification function is disabled. Press the + button until '15' appears on the LCD. Press the Black button or the Color button. Press the + button until '14' appears on the LCD. The ( Setup) icon and '1' appear on the LCD.

Ink cartridge reset button full#

If you refill ink tanks when remaining ink level notification function is enabled and when the remaining ink error has not occurred, refill all four ink tanks until full and then reset the remaining ink level count. Resetting the remaining ink level count when a remaining ink error has not occurred The icon turns off and the remaining ink level notification function is disabled. Press the Black button or the Color button and release it immediately. To disable the remaining ink level notification function The icon turns off and the remaining ink level count is reset. Press the Black button or the Color button for more than 5 seconds. To continue enabling the remaining ink level notification function Refill all four ink tanks until full and then reset the remaining ink level count. If the remaining ink level notification function is enabled, the icon flashes on the LCD when ink runs low. If remaining ink level notification function is enabled Resetting the remaining ink level count when a remaining ink error occurs